Cisco Catalyst 9600 Series User Manual

Figure 29: NEBS-Compliant Air Filter
We recommend that you change the air filter every 3 months. However, examine the air filter once
a month (or more often in dusty environments) and replace it if it appears to be excessively dirty
or damaged. To comply with Telecordia GR-63-Core standard air filter requirements for NEBS
deployments, the air filter must be replaced, not cleaned.
Note
Step 8 Install the top and base covers as shown in the illustrations:
Cisco Catalyst 9600 Series Switches Hardware Installation Guide
56
Installing the Switch
Rack-Mounting the Chassis in NEBS-Compliant Mode

Cisco Catalyst 9600 Series Specifications

General

Series	Catalyst 9600 Series
Category	Switch
Switching Capacity	Up to 25.6 Tbps
Software	Cisco IOS XE
Form Factor	Modular chassis
Purpose	Enterprise campus core and distribution
Ports	10G, 25G, 40G, 100G, 400G
Redundancy	Yes, supports redundant power supplies and fans
Stacking	Virtual Stacking supported
Security	Advanced security features including MACsec encryption
Management	Cisco DNA Center, CLI, SNMP
Uplink Ports	40G, 100G
Power Supply	Redundant, hot-swappable
Operating Temperature	0°C to 45°C (32°F to 113°F)
Port Density	Up to 384 ports
Weight	Starting at 75 lbs (34 kg)
Modular Slots	Up to 6 line card slots