Name: Cisco Catalyst C9300-48P
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Network Module LEDs

Network Module Link StatusColor

Link is off.Off

Link is on; no activity.Green

Activity on a link; no faults.

The LED will blink green even when there is very little control traffic.

Note

Blinking green

Link is off due to a fault or because it has exceeded a limit set in the switch software.

Link faults occur when noncompliant cabling is connected to an

SFP/SFP+/SFP28 port. Use only standard-compliant cabling to connect to

Cisco SFP/SFP+/SFP28 ports. You must remove from the network any cable

or device that causes a link fault.

Caution

Blinking amber

Link for the SFP/SFP+/SFP28 has been disabled.Amber

Rear Panel

The switch rear panel includes StackWise connectors, StackPower or XPS connectors, ports, fan modules,

and power supply modules.

Cisco Catalyst 9300 Series Switches Hardware Installation Guide

Product Overview

Network Module LEDs

Questions and Answers:

Need help?

Do you have a question about the Cisco Catalyst C9300-48P and is the answer not in the manual?

Cisco Catalyst C9300-48P Specifications

General