Cisco Catalyst C9300-48P User Manual

Name: Cisco Catalyst C9300-48P
Brand: Cisco
Rating: 4 (1 reviews)

140 pages

To Next Page

To Previous Page

Figure 38: Connecting the StackWise-480/1T Cable in a StackWise Port

Connector screws2Cisco logo1

Step 3 Connect the other end of the cable to the port on the other switch and finger-tighten the screws. Avoid

overtightening the screws.

To remove the StackWise-480/1T cable from the connector, make sure you fully unscrew the correct screws.

When the connectors are not being used, replace the dust covers.

Removing and installing the StackWise cable can shorten its useful life. Do not remove and insert

the cable more often than is absolutely necessary (installing and removing it up to 200 times is

supported).

Caution

Cisco Catalyst 9300 Series Switches Hardware Installation Guide

Installing a Switch

Connecting a StackWise-480/1T Cable

Questions and Answers:

Need help?

Do you have a question about the Cisco Catalyst C9300-48P and is the answer not in the manual?

General