DescriptionSupported Power Supply ModulesSwitch Series
350 W AC power supply module
PWR-C1-350WACC9300L Series
Switches
715 W AC power supply modulePWR-C1-715WAC
715 W AC Platinum certified power supply
module
PWR-C1-715WAC-P
1100 W AC Platinum certified power supply
module
PWR-C1-1100WAC-P
1900 W AC Platinum certified power supply
module
PWR-C1-1900WAC-P
715 W DC power supply modulePWR-C1-715WDC
600 W AC Platinum certified power supply
module
PWR-C6-600WACC9300LM Series
Switches
1000 W AC Platinum certified power supply
module
PWR-C6-1KWAC
350 W AC Platinum certified power supply
module
PWR-C1-350WAC-PC9300X Series
Switches
715 W AC Platinum certified power supply
module
PWR-C1-715WAC-P
1100 W AC Platinum certified power supply
module
PWR-C1-1100WAC-P
1900 W AC Platinum certified power supply
module
PWR-C1-1900WAC-P
1. PWR-C1-1900WAC-P provides 1900 W output power when the nominal input voltage is 230 V. If the
nominal input voltage is 115 V, then the output power is limited to 1500 W. See Table 47: AC Power
Cords for PWR-C1-1900WAC-P, on page 119 for suitable power cord options.
For more information about power supplies, see Specifications for the Power Supplies, Switches, and
Fan, on page 116.
Note
For information on available PoE, PoE+, and Cisco UPOE/UPOE+ requirements, see these sections the Power
Supply Modules, on page 25.
The 350 W and 715 W AC power supply modules are autoranging units that support input voltages from 100
through 240 VAC. The 1100W power supply module is an autoranging unit that supports input voltages from
115 through 240 VAC.
Each AC power supply module has a power cord for connection to an AC power outlet. To view the list of
available AC power cords, see AC Power Cord Specifications, on page 118.
The following illustrations show the power supply modules.
Cisco Catalyst 9300 Series Switches Hardware Installation Guide
82
Installing a Power Supply
Power Supply Modules Overview
To Next Page
Loading...
Need help?
General
