Cisco Catalyst C9300-48P User Manual

Figure 48: 715W DC Power Supply (PWR-C1-715WDC)
Input power terminal
(positive polarity)
6715 W DC power supply
module
1
Input power terminal
(negative polarity)
7DC OK LED2
Grounding terminal8PS OK LED3
Terminal block safety
cover
9Release latch4
--Extraction handle5
If no power supply is installed in a power supply slot, install a power supply slot cover.
Cisco Catalyst 9300 Series Switches Hardware Installation Guide
85
Installing a Power Supply
Power Supply Modules Overview

Cisco Catalyst C9300-48P Specifications

General

Model	C9300-48P
Ports	48x 10/100/1000 PoE+ ports
Switching Capacity	176 Gbps
Stacking Bandwidth	480 Gbps
Stackable	Yes
DRAM	8 GB
Flash Memory	16 GB
Power Device	Internal power supply
Uplink Interfaces	4 x 10G
Power Supply	715W AC
Dimensions	1.73 x 17.5 x 17.5 inches
Input Voltage	100 to 240 VAC
Operating Temperature	32 to 104°F (0 to 40°C)