Cisco Catalyst C9300-48T

Connecting to the StackPower Ports 38
Installing a Network Module in the Switch 38
Installing and Removing SFP, SFP+, SFP28 and QSFP+ Modules 38
Connecting Devices to the Ethernet Ports 38
10/100/1000 Port Connections 39
Auto-MDIX Connections 39
PoE+ and Cisco UPOE Port Connections 39
Installing a Network Module 41
CHAPTER 3
Network Modules Overview 41
Installing a Network Module in the Switch 42
Safety Warnings 42
Equipment That You Need 42
Installing Network Modules 43
Network Module Port Configurations 45
C9300-NM-2Q Module 45
C9300-NM-4G Module 46
C9300-NM-4M Module 46
C9300-NM-2Y Module 46
C9300-NM-8X Module 47
C3850-NM-4-1G Module 47
C3850-NM-4-10G Module 48
C3850-NM-2-10G Module 48
C3850-NM-8-10G Module 49
C3850-NM-2-40G Module 49
Removing a Network Module 50
SFP, SFP+ and SFP28 Modules 51
Installing SFP, SFP+ and SFP28 Modules 51
Removing SFP, SFP+ and SFP28 Modules 53
Finding the Network Module Serial Number 53
Installing a Power Supply 55
CHAPTER 4
Power Supply Modules Overview 55
Installation Guidelines 57
Cisco Catalyst 9300 Series Switches Hardware Installation Guide
iv
Contents