Cisco CP-7942G User Manual

5-18
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 7.0
OL-15483-01
Chapter 5 Configuring Features, Templates, Services, and Users
Setting Up Services
nonstandard. Standard softkey templates include Standard User, Standard Feature, Standard Assistant,
Standard Manager, and Standard Shared Mode Manager. An application that supports softkeys can have
one or more standard softkey templates associated with it. You can modify a standard softkey template
by making a copy of it, giving it a new name, and making updates to that copied softkey template. You
can also modify a nonstandard softkey template.
To configure softkey templates, select Device > Device Settings > Softkey Template from
Cisco
Unified Communications Manager Administration. To assign a softkey template to a phone, use
the Softkey Template field in the Cisco
Unified Communications Manager Administration Phone
Configuration page. Refer to Cisco Unified
Communications Manager Administration Guide, Cisco
Unified Communications Manager System Guide for more information.
Setting Up Services
The Services button on the Cisco Unified IP Phone 7962G and 7942G gives users access to
Cisco
Unified IP Phone Services. You can also assign services to the programmable buttons on the
phone (refer to Cisco
Unified IP Phone 7962G and 7942G Phone Guide for more information). These
services comprise XML applications that enable the display of interactive content with text and graphics
on the phone. Examples of services include local movie times, stock quotes, and weather reports.
Before a user can access any service,
• You must use Cisco Unified Communications Manager Administration to configure available
services.
• The user must subscribe to services using the Cisco Unified Communications Manager User
Options application. This web-based application provides a graphical user interface (GUI) for
limited, end-user configuration of IP Phone applications.
Before you set up services, gather the URLs for the sites you want to set up and verify that users can
access those sites from your corporate IP telephony network.
To set up these services, choose Device > Device Settings > Phone Services from Cisco Unified
Communications Manager Administration. Refer to Cisco Unified
Communications Manager
Administration Guide and to Cisco Unified Communications Manager System Guide for more
information.
After you configure these services, verify that your users have access to the Cisco Unified
Communications Manager User Options web-based application, from which they can select and
subscribe to configured services. See the
“How Users Subscribe to Services and Configure Phone
Features” section on page A-3 for a summary of the information that you must provide to end users.
Note To configure extension mobility services for users, refer to the Cisco Unified Communications Manager
Features and Services Guide.
Adding Users to Cisco Unified Communications Manager
Adding users to Cisco Unified Communications Manager allows you to display and maintain
information about users and allows each user to perform these tasks:
• Access the corporate directory and other customized directories from a Cisco Unified IP Phone.
• Create a personal directory.

Cisco CP-7942G Specifications

General

Brand	Cisco
Model	CP-7942G
Category	IP Phone
Language	English