Cisco CP-7942G

7-10
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 7.0
OL-15483-01
Chapter 7 Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone
Status Menu
Firmware Versions Screen
The Firmware Versions screen displays information about the firmware version that is running on the
phone.
Table 7-4 describes the information that is displayed on this screen.
To display the Firmware Version screen, follow these steps:
Procedure
Step 1 Press the Settings button.
Step 2 Select Status.
Step 3 Select Firmware Versions.
To exit the Firmware Version screen, press the Exit softkey.
Port 2 Link state and connection of the Network port
IPv4 Information on the DHCP status. This includes the following
states:
• CDP BOUND
• CDP INIT
• DHCP BOUND
• DHCP DISABLED
• DHCP INIT
• DHCP INVALID
• DHCP REBINDING
• DHCP REBOOT
• DHCP RENEWING
• DHCP REQUESTING
• DHCP RESYNC
• DHCP UNRECOGNIZED
• DHCP WAITING COLDBOOT TIMEOUT
• SET DHCP COLDBOOT
• SET DHCP DISABLED
• DISABLED DUPLICATE IP
• SET DHCP FAST
Table 7-3 Network Statistics Message Information (continued)
Item Description