Cisco CP-7942G User Manual

4-2
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 7.0
OL-15483-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Configuration Menus on the Cisco Unified IP Phone
• Editing Values, page 4-3
• Overview of Options Configurable from a Phone, page 4-4
• Network Configuration Menu, page 4-5
• Device Configuration Menu, page 4-11
Displaying a Configuration Menu
To display a configuration menu, perform the following steps.
Note You can control whether a phone has access to the Settings menu or to options on this menu by using the
Settings Access field in the Cisco
Unified Communications Manager Administration Phone
Configuration window. The Settings Access field accepts these values:
• Enabled—Allows access to the Settings menu.
• Disabled—Prevents access to the Settings menu.
• Restricted—Allows access to the User Preferences menu and allows volume changes to be saved.
Prevents access to other options on the Settings menu.
If you cannot access an option on the Settings menu, check the Settings Access field.
Procedure
Step 1 Press the Applications Menu button.
Step 2 Press the Settings button to access the Settings menu.
Step 3 Perform one of these actions to display the desired menu:
• Use the Navigation button to select the desired menu and then press the Select softkey.
• Use the keypad on the phone to enter the number that corresponds to the menu.
Step 4 To display a submenu repeat Step 3.
Step 5 To exit a menu, press the Exit softkey.
Related Topics
• Unlocking and Locking Options, page 4-3
• Editing Values, page 4-3
• Overview of Options Configurable from a Phone, page 4-4
• Network Configuration Menu, page 4-5
• Device Configuration Menu, page 4-11

Cisco CP-7942G Specifications

General

Brand	Cisco
Model	CP-7942G
Category	IP Phone
Language	English