4-32
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 7.0
OL-15483-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Security Configuration Menu
Table 4-23 describes the 802.1X Authentication Real-Time Status.
Ta b l e 4-23 802.1X Authentication Real-Time Status
Option Description To Change
802.1X Authentication
Status
Real-time progress of the 802.1X authentication
status, displaying one of the following states:
• Disabled—802.1X is disabled and transaction
was not attempted
• Disconnected—Physical link is down or
disconnected
• Connecting—Trying to discover or acquire the
authenticator
• Acquired—Authenticator acquired, awaiting
authentication to begin
• Authenticating—Authentication in progress
• Authenticated—Authentication successful or
implicit authentication due to timeouts
• Held—Authentication failed, waiting before
next attempt (approximately 60 seconds)
Display only—Cannot configure.
To Next Page
Loading...
