Cisco CRS-1 - Carrier Routing System Router Migration Guide

3-72
Cisco CRS-1 Carrier Routing System to Cisco CRS-3 Carrier Routing System Migration Guide
OL-13669-03
Chapter 3 Cisco CRS-3 Carrier Routing System Router Command Changes
show controllers TenGigE
show controllers TenGigE
RP/0/RP0/CPU0:router#sh controllers TenGigE 0/1/0/0 internal
Wed Oct 6 15:43:00.305 EST
Total Power Available on PLIM for XFP's: 35000 mW
Power used by Inserted XFP's: 27500 mW
Power Available: 7500 mW
Port Power Used State
00 2500 mW XFP Inserted and Powered On
01 0000 mW No XFP Inserted
02 2500 mW XFP Inserted and Powered On
03 0000 mW No XFP Inserted
04 2500 mW XFP Inserted and Powered On
05 0000 mW No XFP Inserted
06 1500 mW XFP Inserted and Powered On
07 1500 mW XFP Inserted and Powered On
08 2500 mW XFP Inserted and Powered On
09 1500 mW XFP Inserted and Powered On
10 3500 mW XFP Inserted and Powered On
11 3500 mW XFP Inserted and Powered On
12 3500 mW XFP Inserted and Powered On
13 2500 mW XFP Inserted and Powered On

Cisco CRS-1 - Carrier Routing System Router Specifications

General

Brand	Cisco
Model	CRS-1 - Carrier Routing System Router
Category	Network Router
Language	English