Cisco CRS-1 - Carrier Routing System Router Migration Guide

1-33
Cisco CRS-1 Carrier Routing System to Cisco CRS-3 Carrier Routing System Migration Guide
OL-13669-03
Chapter 1 Migrating to a Cisco CRS-3 Carrier Routing System
How to Migrate to a Cisco CRS-3 Carrier Routing System (16-Slot)
Steps
To install the CRS-3 fabric card, see Figure 1-4 and follow these steps:
Figure 1-4 Installing a CRS-3 Fabric Card
Step 1 Attach the ESD-preventive wrist strap to your wrist and connect its leash to an ESD connection socket
on the front of the chassis or to a bare metal surface on the chassis.
Step 2 Choose an available CRS-3 fabric card slot for the CRS-3 fabric card.
Caution To prevent ESD damage, handle the CRS-3 fabric card by its ejector levers, the CRS-3 fabric
card carrier edges, or the slide-assistance arm only. Do not touch any of the electrical
components, pins, and circuitry.
1 Captive screw 3 Direction of installation or removal
2 Ejector lever
STAT US
PID/VID
CRS-FCC-SFC
CLEI
SN:
129870
1
3
2

Cisco CRS-1 - Carrier Routing System Router Specifications

General

Brand	Cisco
Model	CRS-1 - Carrier Routing System Router
Category	Network Router
Language	English