Cisco CRS-1 - Carrier Routing System Router

1-84
Cisco CRS-1 Carrier Routing System to Cisco CRS-3 Carrier Routing System Migration Guide
OL-13669-03
Chapter 1 Migrating to a Cisco CRS-3 Carrier Routing System
Configuration Examples for Migrating to a Cisco CRS-3 Carrier Routing System
RP/0/RP1/CPU0:router# admin
RP/0/RP1/CPU0:router(admin)# configure
RP/0/RP1/CPU0:router(admin-config)# dsc serial TBC0820031000000 rack 1
RP/0/RP1/CPU0:router(admin-config)# control fabric rack 1 install-mode
RP/0/RP1/CPU0:router(admin-config)# commit
Apply power, attach cables, and check cable LEDs.
RP/0/RP1/CPU0:router(admin-config)# do show controllers fabric rack-status all detail
Rack Rack Server
Num Status Status
---- ------ ------
0 NORMAL PRESENT
1 INSTALL PRESENT Oper State
----------------------
Plane Admin Rack in Rack out
Num State Install of Install
----- ----- ------- ----------
0 UP UP UP
1 UP UP DOWN
2 UP UP DOWN
3 UP UP DOWN
4 UP UP DOWN
5 UP UP DOWN
6 UP UP DOWN
7 UP UP DOWN
F0 NORMAL PRESENT
RP/0/RP1/CPU0:router(admin-config)# do show controllers fabric rack-status all detail
Rack Rack Server
Num Status Status
---- ------ ------
0 NORMAL PRESENT
1 INSTALL PRESENT Oper State
----------------------
Plane Admin Rack in Rack out
Num State Install of Install
----- ----- ------- ----------
0 UP UP UP
1 UP UP UP
2 UP UP UP
3 UP UP UP
4 UP UP UP
5 UP UP UP
6 UP UP UP
7 UP UP UP
F0 NORMAL PRESENT
RP/0/RP1/CPU0:router(admin-config)# show controllers fabric fabric-backpressure summary
Expected BP Fabric Groups in the System: 0 1 2 3
Rack 0: All Groups Received? : Yes
------
Rack 1: All Groups Received? : Yes