Cisco ENCS 5406-W - User Manual

Cisco Systems, Inc.
www.cisco.com
Cisco ENCS 5400-W Series Quick Start Guide
WAAS Software Version 6.4.1x
August 7, 2018
Contents
This document provides an overview of the ENCS-W 5400 Series, and describes the procedures used to
install ENCS-W hardware, load software, and how to power up and configure the ENCS-W device. This
document contains the following sections:
• Cisco ENCS 5400-W Series
• ENCS 5400-W Models that Replace WAVE Devices
• Unpacking and Installing the ENCS 5400-W Device
• Powering Up and Initializing the ENCS 5400-W Device
• Configuring the ENCS 5400-W Device
• Upgrade/Downgrade Guidelines for ENCS 5400-W Devices
• Additional Cisco Documentation for the ENCS 5400-W Series
• Obtaining Documentation and Submitting a Service Request
Cisco ENCS 5400-W Series
This section contains the following topics:
• About the Cisco ENCS 5400-W Series
• vWAAS models supported on ENCS 5400-W
• Cisco NFVIS 3.7.1
• ENCS 5400-W Features and Specifications

Cisco ENCS 5406-W Specifications

General

Model	ENCS 5406-W
Storage	Dual 240 GB M.2 SATA SSD
Power Supply	400W AC
Redundant power supply	Optional
Number of CPU cores	8
System memory	32 GB DDR4
Network ports	8 x 1GE RJ45, 2 x 10GE SFP+
Network Interfaces	2 x 10G SFP+
Dimensions (H x W x D)	1.73 x 17.24 x 18 in
Weight	9.12 kg
Operating Temperature	32 to 104°F
Storage Temperature	-40 to 70°C (-40 to 158°F)
Humidity	5% to 95% non-condensing