Cisco Firepower 4110 User Manual

Cisco Preparative Procedures & Operational User Guide
© 2016 Cisco Systems, Inc. All rights reserved.
4) Configure Local Sources:
a) Click the Local Sources tab.
b) On the Local Sources tab, complete the following fields:
Name
Description
Faults Admin State field
Whether system fault logging is enabled or not. If the
Enable check box is checked, the Firepower chassis logs
all system faults.
Audits Admin State field
Whether audit logging is enabled or not. If the Enable
check box is checked, the Firepower chassis logs all audit
log events.
Events Admin State field
Whether system event logging is enabled or not. If the
Enable check box is checked, the Firepower chassis logs
all system events.
c) Click Save.

Cisco Firepower 4110 Specifications

General

Power Supply	Dual, hot-swappable
Form Factor	1RU
Firewall Throughput (Multiprotocol)	10 Gbps
Number of 10GE (SFP+) Interfaces	8
Number of 40GE (QSFP+) Interfaces	2
Redundant Power Supply	Yes
Memory	32 GB
Ports	8 x 10GE, 2 x 40GE
Concurrent Sessions	8 Million
Number of 10/100/1000 Interfaces	8
Maximum Connections	8 Million
Management Ports	1 x RJ45
Data Ports	8 x 10GE, 2 x 40GE
Processor	Intel Xeon E5-2600