Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
© 2006–2009 Cisco Systems, Inc. All rights reserved.
Configuring ISG Network Forwarding Policies
First Published: March 20, 2006
Last Updated: March 2, 2009
Intelligent Services Gateway (ISG) is a Cisco IOS software feature set that provides a structured
framework in which edge devices can deliver flexible and scalable services to subscribers. An ISG
network forwarding policy is a type of traffic policy that allows packets to be routed or forwarded to and
from an upstream network. This module provides information about how to configure network
forwarding policies.
Finding Feature Information
For the latest feature information and caveats, see the release notes for your platform and software
release. To find information about the features documented in this module, and to see a list of the releases in
which each feature is supported, see the “Feature Information for ISG Network Policies” section on page 7.
Use Cisco Feature Navigator to find information about platform support and Cisco IOS XE software
image support. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on
Cisco.com is not required.
Contents
• Prerequisites for Configuring ISG Network Forwarding Policies, page 2
• Restrictions for Configuring ISG Network Forwarding Policies, page 2
• Information About ISG Network Policies, page 2
• How to Configure ISG Network Policies, page 3
• Configuration Examples for ISG Network Policies, page 6
• Additional References, page 7
• Feature Information for ISG Network Policies, page 7
To Next Page
Loading...
Need help?
General