Configuring ISG Accounting
How to Configure ISG Accounting
13
00001000 = Thursday
00010000 = Friday
00100000 = Saturday
01000000 = Sunday
Step 2 Cisco-AVpair = "ip:traffic-class={in | out} access-group [acl_number | name acl_name] [priority n]"
Add the ISG Traffic Class attribute to the service profile. This attribute specifies input and output traffic
to which the service will apply. Both an input and output traffic classifier can be added to a service
profile.
What to Do Next
You may want to configure a method of activating the service policy map or service profile; for example,
control policies can be used to activate services. For more information about methods of service
activation, see the module “Configuring ISG Subscriber Services”.
Verifying ISG Accounting and Postpaid Tariff Switching
Perform the following tasks to verify ISG accounting and postpaid tariff switching configuration:
• Display Information About a Subscriber Session, page 13
• Display AAA Subscriber Sessions, page 15
• Display AAA Information for Subscribers, page 16
• Display Information About ISG Postpaid Tariff Switching, page 19
Display Information About a Subscriber Session
Use the show subscriber session command to display information about an ISG subscriber session.
SUMMARY STEPS
1. enable
2. show subscriber session [detailed] [identifier identifier | uid session-id | username name]
To Next Page
Loading...
Need help?
General