Configuring ISG Support for Prepaid Billing
How to Configure ISG Support for Prepaid Billing
5
• Forwarding Subscriber Traffic upon Depletion of Quota, page 14 (optional)
• Troubleshooting ISG Prepaid Billing Support, page 16 (optional)
Note The tasks in this document assume that a subscriber session has been created and a method of service
activation is in place
Configuring RADIUS Attribute Support for ISG Prepaid Billing
Perform this task to enable ISG to include RADIUS attribute 44 in Access-Request packets and attribute
55 in Accounting-Request packets.
SUMMARY STEPS
1. enable
2. configure terminal
3. radius-server attribute 44 include-in-access-req [vrf vrf-name]
4. radius-server attribute 55 include-in-acct-req
5. end
6. show subscriber session [detailed] [identifier identifier | uid session-id | username name]
To Next Page
Loading...
