Configuring ISG Policies for Session Maintenance
How to Configure Policies for Session Maintenance Timers
9
Restrictions for Troubleshooting the Session Maintenance Timers
Caution Because debugging output is assigned high priority in the CPU process, it can render the system
unusable. For this reason, use the Cisco IOS debug commands only to troubleshoot specific problems
or during troubleshooting sessions with Cisco technical support staff. Moreover, it is best to use debug
commands during periods of lower network traffic and fewer users, or on a debug chassis with a single
active session. Debugging during these periods decreases the likelihood that increased debug command
processing overhead will affect system use.
Debug Commands Available for the Session Maintenance Timers
Table 1 lists the debug commands that can be used to diagnose problems with the session maintenance
timers.
Enabling the Session Maintenance Timer Debug Commands
Perform this task to enable the session maintenance timer debug commands.
SUMMARY STEPS
1. enable
2. debug command
3. end
DETAILED STEPS
Table 1 Debug Commands for Troubleshooting Session Maintenance Timers
Command Purpose
debug subscriber feature error Displays general Feature Manager errors.
debug subscriber feature event Displays general Feature Manager events.
debug subscriber feature name idle-timer error Displays idle timer errors.
debug subscriber feature name idle-timer event Displays idle timer events.
debug subscriber feature name session-timer error Displays session timer errors.
debug subscriber feature name session-timer event Displays session timer events.
Command or Action Purpose
Step 1
enable
Example:
Router> enable
Enables higher privilege levels, such as privileged EXEC
mode.
• Enter your password if prompted.
To Next Page
Loading...
Need help?
General