Cisco IOS XE Intelligent Services - Page 292

Configuring ISG Policies for Session Maintenance
Configuration Examples for Session Maintenance Timers
15
Interface: Virtual-Access2.1
Policy information:
Context 02DE7380: Handle 1B000009
Authentication status: authen
User profile, excluding services:
Framed-Protocol 1 [PPP]
username "user01"
Framed-Protocol 1 [PPP]
username "user01"
Prepaid context: not present
Non-datapath features:
Feature: Session Timeout
Timeout value is 180000 seconds
Time remaining is 2d01h
Configuration sources associated with this session:
Interface: Virtual-Template1, Active Time = 00:02:52
Connection Idle Timer Show Command Output: Example
The following example shows the settings for the idle timer as displayed by the show subscriber session
all privileged EXEC command.
Current Subscriber Information: Total sessions 1
--------------------------------------------------
Unique Session ID: 4
Identifier: user01
SIP subscriber access type(s): PPPoE/PPP
Current SIP options: Req Fwding/Req Fwded
Session Up-time: 00:01:44, Last Changed: 00:01:46
AAA unique ID: 5
Interface: Virtual-Access2.1
Policy information:
Context 02DE7380: Handle AD00000C
Authentication status: authen
User profile, excluding services:
Framed-Protocol 1 [PPP]
username "user01"
Framed-Protocol 1 [PPP]
username "user01"
Prepaid context: not present
Session outbound features:
Feature: PPP Idle Timeout
Timeout value is 2000
Idle time is 00:01:44
Configuration sources associated with this session:
Interface: Virtual-Template1, Active Time = 00:01:47
Session Timer Debug Output: Example
The following example shows output when the session timer debug commands (debug subscriber
feature error, debug subscriber feature event, debug subscriber feature name session-timer error,
and debug subscriber feature name session-timer event) are enabled.