Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
© 2009 Cisco Systems, Inc. All rights reserved.
Configuring ISG Policies for Regulating Network
Access
First Published: March 20, 2006
Last Updated: March 2, 2009
Intelligent Services Gateway (ISG) is a Cisco IOS and Cisco IOS XE software feature set that provides
a structured framework in which edge devices can deliver flexible and scalable services to subscribers.
ISG supports the use of policies for governing subscriber session bandwidth and network accessibility.
This module provides information about the following methods of regulating session bandwidth and
network access: Modular Quality of Service (QoS) command-line interface (CLI) policies, and ISG
policing.
Finding Feature Information
For the latest feature information and caveats, see the release notes for your platform and software
release. To find information about the features documented in this module, and to see a list of the releases in
which each feature is supported, see the “Feature Information for ISG Policies for Regulating Network
Access” section on page 8.
Use Cisco Feature Navigator to find information about platform support and Cisco IOS XE software
image support. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on
Cisco.com is not required.
Contents
• Information About ISG Policies for Regulating Network Access, page 2
• How to Configure ISG Policies for Regulating Network Access, page 2
• Configuration Examples for ISG Policies for Regulating Network Access, page 7
• Additional References, page 7
• Feature Information for ISG Policies for Regulating Network Access, page 8
To Next Page
Loading...
