Cisco IOS XE Intelligent Services User Manual

Configuring ISG Integration with SCE
How to Configure ISG Integration with SCE
6
Configuring SCE Connection Parameter on ISG
To configure the server connection management on either a per-server or a global basis, perform the steps
in this section.
SUMMARY STEPS
1. enable
2. configure terminal
3. policy-peer address ip-address keepalive seconds
4. policy-peer keepalive seconds
5. exit

Cisco IOS XE Intelligent Services Specifications

General

Brand	Cisco
Model	IOS XE Intelligent Services
Category	Gateway
Language	English