Cisco IOS XR

Configuring AAA Services on Cisco IOS XR Software
How to Configure AAA Services
SC-197
Cisco IOS XR System Security Configuration Guide
3. server-private {hostname | ip-address} [auth-port port-number] [acct-port port-number]
[timeout seconds] [retransmit retries] [key string]
4. vrf vrf-name
5. end
or
commit
DETAILED STEPS
Command or Action Purpose
Step 1
configure
Example:
RP/0/RP0/CPU0:router# configure
Enters global configuration mode.
Step 2
aaa group server radius group-name
Example:
RP/0/RP0/CPU0:router(config)# aaa group server
radius radgroup1
RP/0/RP0/CPU0:router(config-sg-radius)#
Groups different server hosts into distinct lists and
enters the server group configuration mode.
Step 3
server-private { hostname | ip-address } [auth-port
port-number ] [acct-port port-number ] [timeout
seconds ] [retransmit retries ] [key string ]
Example:
RP/0/RP0/CPU0:router(config-sg-radius)#
server-private 10.1.1.1 timeout 5
RP/0/RP0/CPU0:router(config-sg-radius)#
server-private 10.2.2.2 retransmit 3
Configures the IP address of the private RADIUS
server for the group.
If private server parameters are not specified, global
configurations are used. If global configurations are
not specified, default values are used.
Both auth-port and acct-port keywords enter
RADIUS server-group private configuration mode.