Cisco IP DECT 6825 Hardware Installation

What to do next
Before you use the handset, you need to charge it. See Charge the Handset Battery, on page 17.
Set Up the Charging Cradle
You use the charging cradle to charge the handset. The cradle has a built-in USB cable that plugs into the
power adapter. The power adapter is designed for your country's electrical outlet configuration and power
rating.
Procedure
Step 1 Place the cradle on a level surface.
Step 2 Plug the USB connector of the power cord into the power adapter.
Step 3 Plug the power adapter into the electrical outlet.
Hardware Installation
16
Hardware Installation
Set Up the Charging Cradle

Cisco IP DECT 6825 Specifications

General

Brand	Cisco
Model	IP DECT 6825
Category	IP Phone
Language	English