Step 9 If required, plug the power adapter into the electrical outlet.
What to do next
Configure the Base Station
Mount the Base Station on a Desk
You can place the base station on a desk or other horizontal surface (for example, a book shelf). Select a
location where the base station won't be easily knocked off.
Each base station has a range of up to 984 feet (300 meters).
In this task, the term device means the base station.
Before you begin
You need:
• LAN connection close to the mounting location.
• If you do not use PoE, a power outlet close to the mounting location.
• Ensure that the base station can communicate with the network (see Install the Base Station, on page
5). After it can communicate and the LED is green, you can unplug the cables if you haven't tested the
base station in the final location.
Determine the best placement, taking into account the coverage area and the building construction materials.
You may need to install addition base stations for best coverage.
You can use the site survey tool on the handset to plan placement.
Procedure
Step 1 Connect the Ethernet cable to the device and route the cable through the slot in the device.
Step 2 If required, plug the power adapter into the device and route the cable through the slot in the device.
Step 3 Slide the stand into the device and press it until it clicks into place.
This graphic shows the stand connection to the base station.
Hardware Installation
9
Hardware Installation
Mount the Base Station on a Desk
To Next Page
Loading...
Need help?
General