Cisco IP Phone Administration Guide

Contents
iv
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
OL-23091-01
Checklist for Configuring the Cisco Unified IP Phones in Cisco Unified Communications Manager
Administrations
1-22
Installing Cisco Unified IP Phones 1-25
Checklist for Installing the Cisco Unified IP Phones 1-25
CHAPTER 2 Preparing to Install the Cisco Unified IP Phones on Your Network 2-1
Understanding Interactions with Other Cisco Unified IP Telephony Products 2-1
Understanding How the Cisco Unified IP Phones Interact with Cisco Unified Communications
Manager
2-2
Understanding How the Cisco Unified IP Phones Interact with the VLAN 2-2
Providing Power to the Cisco Unified IP Phones 2-3
Power Guidelines 2-4
Power Outage 2-4
Obtaining Additional Information about Power 2-5
Understanding Phone Configuration Files 2-5
Understanding the Phone Startup Process 2-7
Adding Phones to the Cisco Unified Communications Manager Database 2-8
Adding Phones with Auto-Registration 2-9
Adding Phones with Auto-Registration and TAPS 2-10
Adding Phones with Cisco Unified Communications Manager Administration 2-11
Adding Phones with BAT 2-11
Using Cisco Unified IP Phones with Different Protocols 2-12
Converting a New Phone from SCCP to SIP 2-12
Converting an In-Use Phone from One Protocol to the Other 2-13
Deploying a Phone in an SCCP and SIP Environment 2-13
Determining the MAC Address for a Cisco Unified IP Phones 2-13
CHAPTER 3 Setting Up the Cisco Unified IP Phones 3-1
Before You Begin 3-1
Network Requirements 3-2
Cisco Unified Communications Manager Configuration 3-2
Understanding the Cisco Unified IP Phone Components 3-2
Network and Access Ports 3-3
Handset 3-3
Speakerphone 3-4
Headset 3-4
Audio Quality Subjective to the User 3-4
Connecting a Headset 3-4
Disabling a Headset 3-5

Cisco IP Phone Specifications

General

Brand	Cisco
Model	IP Phone
Category	IP Phone
Language	English