C-1
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
OL-23091-01
APPENDIX
C
Supporting International Users
Translated and localized versions of the Cisco Unified IP Phones are available in several languages. If
you are supporting Cisco
Unified IP Phones in a non-English environment, see the following sections to
ensure that the phones are set up properly for your users:
• Adding Language Overlays to Phone Buttons, page C-1
• Installing the Cisco Unified Communications Manager Locale Installer, page C-1
• Support for International Call Logging, page C-2
Adding Language Overlays to Phone Buttons
To support the needs of international users, the button labels on the Cisco Unified IP Phones exhibit
icons rather than text to indicate the purposes of the buttons. You can purchase language-specific text
overlays to add to a phone. To order these language-specific overlays, go to this website:
http://www.overlaypro.com/cisco_systems?b=1
Note Phone overlays are available only for languages in which the Cisco Unified IP Phone software has been
localized. All languages may not be immediately available, so continue to check the website for updates.
Installing the Cisco Unified Communications Manager Locale
Installer
If you are using Cisco Unified IP Phones in a locale other than English (United States), you must install
the locale-specific version of the Cisco Unified Communications Manager Locale Installer on every
Cisco
Unified Communications Manager server in the cluster. Installing the locale installer ensures that
you have the latest translated text, user and network locales, and country-specific phone tones available
for the Cisco
Unified IP Phones. You can find locale-specific versions of the Cisco Unified
Communications Manager Locale Installer at
http://www.cisco.com/kobayashi/sw-center/telephony/callmgr/locale-installer.shtml.
To Next Page
Loading...
Need help?
General