Cisco IP Phone Administration Guide

E-7
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
OL-23091-01
Appendix E Basic Phone Administration Steps
Performing Final End User Configuration Steps
– Select the device, then click Save Selected/Changes. The user is now associated with the
device.
– Click the Go button next to the “Back to User” Related link in the upper-right corner of the
screen.
l. Proceed to Performing Final End User Configuration Steps, page E-7.
Performing Final End User Configuration Steps
If you are not already on the End User Configuration page, choose User Management > End User to
perform some final configuration tasks. Use the Search fields and the Find button to locate the user (for
example, John Doe), then click on the user ID to get to the End User Configuration window for the user.
In the End User configuration window, do the following:
Procedure
Step 1 In the Directory Number Associations pane of the screen, set the primary extension from the drop-down
list.
Step 2 In the Mobility Information pane, check the Enable Mobility box.
Step 3 In the Permissions Information pane, use the User Group buttons to add this user to any user groups. For
example, you may want to add the user to a group that has been defined as a Standard CCM End User
Group.
To view all configured user groups, choose User Management > User Group.
Step 4 Click Save.

Cisco IP Phone Specifications

General

Brand	Cisco
Model	IP Phone
Category	IP Phone
Language	English