Cisco IP Phone

3-8
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
OL-23091-01
Chapter 3 Setting Up the Cisco Unified IP Phones
Installing the Cisco Unified IP Phones
Figure 3-2 Cisco Unified IP Phone 7962G and 7942G Cable Connections
Related Topics
• Feature Key Capacity Increase for Cisco Unified IP Phones, page 3-10
• Verifying the Phone Startup Process, page 3-14
• Configuring Startup Network Settings, page 3-15
• Configuring Security on the Cisco Unified IP Phones, page 3-15
1
DC adaptor port (DC48V) for phones not provided with inline
power
6
Handset port
2
AC-to-DC power supply
7
Headset port
3
AC power cord
8
Footstand adjustment button
4
Network port (10/100 SW on the 7962G/7942G/7961G/7941G;
10/100/1000 SW on the 7961G-GE/7941G-GE) for connecting to
the network
9
Auxiliary port (AUX)
5
Access port (10/100 PC on the 7962G/7942G/7961G/7941G;
10/100/1000 PC on the 7961G-GE/7941G-GE) for connecting your
phone to your computer
AUX
DC48V
10/100 SW 10/100 PC
+
185045
2
9
8
3
4
5
6
7
1