17
Getting Started and Product Document of Compliance for the Cisco IR809 Integrated Services Router
78-100612-01A0
Antennas
[The IR809 series products are equipped with antenna connectors to allow the use of dedicated (external)
antennas available from Cisco.
The following link to the data sheet lists the antennas that can be used by IIR809G-LTE-GA-K9. All
antennas where assessed together with the equipment against the requirements of the R&TTE directive.
http://www.cisco.com/c/en/us/products/collateral/routers/809-industrial-router/datasheet-c78-734980.h
tml
Depending on the country a different regulatory limit might be applicable. It is therefore the
responsibility of the end user to select a power level that, together with the antenna, results in an eirp
(radiated power) level that is below the applicable limit.
Note The antenna gain mentioned does not include the cable loss. For all combinations, the total of power
level, antenna gain and cable loss is equal to or below 43.5 dBm (eirp).
Obtaining Documents from Cisco.com
Follow these steps to obtain any of the online documents mentioned in this document.
Step 1 Browse to this URL on Cisco.com:
http://www.cisco.com/cisco/web/psa/default.html?mode=prod&level0=278875243
Step 2
For Cisco IR809 Series wireless products, click
http://www.cisco.com/c/en/us/support/routers/809-industrial-router/model.html
Note If you still have questions regarding the compliance of these products or you can not find the information
you are looking for, please send an email request to Cisco at complianceinfo@cisco.com.
To Next Page
Loading...
Need help?
General
