3
Getting Started and Product Document of Compliance for the Cisco IR809 Integrated Services Router
78-100612-01A0
Related Documentation
To access resources or to display the latest Cisco 800 Series Router documentation on-line, go to this
URL:www.cisco.com/go/ir809
This portal has all of the information you need to get to know your router, install and configure it, as well
as access software. Look at the right side of the page under Support. You will see the following
categories as well as other important information:
• All support information for Cisco 800 Series Routers: Provides the most requested resources and
a list of all of the models in the series.
• Software Downloads, Release and General Information: Links to the Software Download site,
Compatibility Information, Licensing Information, and Product Release notes.
• Install and Upgrade: This is your starting point for Installing the Router. look under The Install
and Upgrade Guide section for this model,
• Configure: These links provide configuration information. Look first under the Configuration
Guide section for this model.
Other important and helpful links to Cisco information are here:
• Cisco.com: www.cisco.com
• Warranty Information: www.cisco-warrantyfinder.com
• Cisco Information Packet, consisting of Cisco Limited Warranty, Disclaimer of Warranty, End User
License Agreement, and United States Federal Communications Commission Notice:
www.cisco.com/en/US/docs/general/warranty/English/SL3DEN.html
• Cisco Marketplace: www.cisco.com/pcgi-bin/marketplace/welcome.pl
• Cisco Product Documentation: www.cisco.com/go/techdocs
• Regulatory Compliance and Safety Information:
https://www.cisco.com/c/en/us/td/docs/routers/access/800/829/regulatory/IR800rcsi.html
• Cisco Support: www.cisco.com/cisco/web/support/index.html
Installation Warning and Caution Statements
Warning
IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you
work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar
with standard practices for preventing accidents. Use the statement number provided at the end of
each warning to locate its translation in the translated safety warnings that accompanied this device.
Statement 1071
Warning
In order to comply with FCC radio frequency (RF) exposure limits, antennas for this product should be
located a minimum of 7.9 in. (20 cm) or more from the body of all persons.
Statement 332
Warning
Read the installation instructions before connecting the system to the power source.
Statement 1004
Warning
This unit is intended for installation in restricted access areas. A restricted access area can be
accessed only through the use of a special tool, lock and key, or other means of security.
Statement 1017