Product Overview
This chapter provides an overview of the features available for the Cisco 809 Integrated Services Routers
(ISRs).
For compliance and safety information, see Regulatory Compliance and Safety Information for Cisco 800
Series
Note
• General Description, on page 1
• SKU Information, on page 7
• Hardware Features, on page 8
• Supported Cisco Antennas and Cables, on page 9
• Power Supply, on page 16
• RJ45 Ports, on page 17
• Accessories, on page 18
General Description
The Cisco 809 Integrated Services Router (IR809), part of the Cisco Integrated Services Routers Generation
2 (ISR G2) Family, is designed as a next generation ruggedized fixed form factor router. It is a small-form
factor router with LTE, for use in ATM, POS, Telemetry, Billboards, Enterprise Fleet markets, Utilities and
other SCADA (Supervisory Control and Data Acquisition) environments.
The documentation set for this product strives to use bias-free language. For purposes of this documentation
set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial
identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be
present in the documentation due to language that is hardcoded in the user interfaces of the product software,
language used based on RFP documentation, or language that is used by a referenced third-party product.
Note
The following figure shows the IR809.
Product Overview
1
To Next Page
Need help?
General
