Mechanical Specifications:
• Base material: Cisco gray UL94 V0 PC/ABS plastic
• Dimensions: 2.8 x 2.4 x 1.8 in. (7.1 x 6.1 x 4.6 cm)
• Weight: 6 oz. (0.17 kg)
• Cable: 15 ft. (457.2 cm) non-plenum rated Pro-Flex Plus 195
Antenna Extension 4G-AE010-R
Description:
• Single-unit antenna extension base (10 ft. [304.8 cm], one cable included)
Electrical Specifications:
• Frequency range: 6 GHz
• Attenuation: less than 3 dB at or below 2.5 GHz
• Base connector: TNC socket
• Pigtail connector: TNC plug
Mechanical Specifications:
• Base material: UL 94 V0PC and ABS plastic
• Dimensions: 2.8 x 2.4 x 1.8 in. (7.1 x 6.1 x 4.6 cm)
• Weight: 6 oz. (0.17 kg)
• Cable: 10 ft. (304.8 cm) non-plenum rated Pro-Flex Plus 195
Modem Support
The Cisco IR800 series Industrial routers use the MC73XX series modems. The software download page can
be found here:
https://software.cisco.com/download/navigator.html?mdfid=286288566&flowid=76082
The MC73XXFirmware Upgrade Guide can be found here:
http://www.cisco.com/c/en/us/td/docs/routers/access/interfaces/firmware/Firmware_Upgrade.html
Power Supply
The Cisco IR809 comes with an external DC power connector. The 4-pin power entry connector (receptacle)
is mounted to the unit. The 4-pin power entry mating connector (plug) is attached to the receptacle. It is
removed during installation and used to connect to the DC power source, then reattached to provide power
to the unit.
Product Overview
16
Product Overview
Antenna Extension 4G-AE010-R
To Next Page
Loading...
Need help?
General
