Cisco IW3702 User Manual

DescriptionItem
Select from:
•
4 x N(m)-R/A to N(m)-STR, RF cable, CAB-L400-5-N-N
• 4 x N(m)-STR to N(m)-STR, LMR-400-DB, 5’ RF cable,
Cisco PID: CAB-L400-5-N-NS
• 4x N(m)-R/A to N(m)-STR, LMR-400-DB, 10’ RF cable,
Cisco PID: AIR-CAB010LL-N
• 4 x N(m)-R/A to N(m)-STR, LMR-400-DB, 20’,
CAB-L400-20-N-N
• 4 x N(m)-R/A to N(m)-STR, LMR-600-DB, 30’,
CAB-L600-30-N-N
• 4 x N(m)-STR to N(m)-STR, LMR-400-DB, 25’ RF cable
with petrochemical and oils resistance, Cisco PID
AIR-CAB025HZ-N
Outdoor Cable
1 x Cisco Aironet AIR-ANT2513P4M-N four-port dual-band
polarization-diverse array antenna is required. The antenna
specifications are:
•
2.4-2.5 GHz, 5.15-5.925 GHz dual-band WiFi operating
frequency ranges
•
13 dBi peak gain
•
Type N(f) connector
•
IP67 rated, -40 to 185°F (-40°C to 85°C) operating
temperature range
•
Cisco PID AIR-ANT2513P4M-N
Antenna
Outdoor Cisco Aironet Four-Port Dual-Band Polarization-Diverse Array Antenna and Access Point for Remote or Indoor Use
Scenario
Table 12: Outdoor Four-Port Dual-Band Polarization-Diverse Array Antenna and Access Point for Remote or Indoor Use Scenario
DescriptionItem
1 x Cisco Aironet AIR-ANT2513P4M-N four-port dual-band
polarization-diverse array antenna mounted remotely outdoors,
with access point indoors or enclosed.
Antenna Arrangement
IW3702-2E-x-K9, IW3702-4E-x-K9, IW3702-2E-UXK9 or
IW3702-4E-UXK9
Access Point
34

Cisco IW3702 Specifications

General

Model	IW3702
Category	Wireless Access Point
Wireless Standards	802.11a/b/g/n/ac
Frequency Bands	2.4 GHz and 5 GHz
Ingress Protection	IP67
Ethernet Ports	2 x 10/100/1000BASE-T
Power Source	PoE (802.3af)
Humidity	5% to 95% (non-condensing)
Security	802.1X
Mounting	Pole, wall