Cisco Linksys SGE2010P User Manual

SGE2010/SGE2010P Administration Guide 10
Connecting to Your Switch with HyperTerminal
Using the Console
1. Click the Start button. Choose Programs > Accessories > Communications >
HyperTerminal.
2. On the Connection Description screen, type a name for this connection, select an icon, and
the
n click OK.
3. On the Connect T
o screen, use the Connect using drop-down list to select a port to
communicate with the switch: COMn, or TCP/ IP.

Cisco Linksys SGE2010P Specifications

General

Brand	Cisco
Model	Linksys SGE2010P
Category	Network Router
Language	English