Cisco Linksys SGE2010P User Manual

SGE2010/SGE2010P Administration Guide 11
Connecting to Your Switch with HyperTerminal
Using the Console
4. Set the serial port settings as follows:
• Bits per second: 115200
• Data bits: 8
• Parity: No
ne
• Stop bits: 1
• Flow control: None
5.
Then, click the OK button.
6.
Optionally, on the File menu, click Save to save these settings. The next time that you need
to connect to the console, you can open this saved connection.

Cisco Linksys SGE2010P Specifications

General

Brand	Cisco
Model	Linksys SGE2010P
Category	Network Router
Language	English