SGE2010/SGE2010P Administration Guide 20
System Configuration
Using the Console
To open this screen:
1. From the Switch Main Menu, select 1. System Configuration Menu.
2. From the Sy
stem Configuration Menu, select 2. Management Settings.
3. From the Ma
nagement Settings Menu, choose 3. SSH Configuration.
4. From the SSH C
onfiguration Menu, select 2. SSH Status.
5. When you finish using this screen, select Quit.
S
SH Crypto Key Generation
Use the SSH Crypto Key Generation screen to generate an SSH RSA or DSA key.
To open this screen:
1. From the S
w
itch Main Menu, select 1. System Configuration Menu.
2. From the Sy
stem Configuration Menu, select 2. Management Settings.
3. From the Ma
nagement Settings Menu, choose 3. SSH Configuration.
4. From the SSH C
onfiguration Menu, select 3. SSH Crypto Key Generation.
5. When you finish using this screen, select Quit.
T
o change SSH Crypto Key Generation settings:
NOTE: Only t
he public key algorithm can be changed.
1. Select Edi
t, and then make your changes.
2. Press the Esc ke
y to move the cursor to the Action list.
3. Select Sav
e to save your changes.
4. When the Oper
ation complete message appears, press the Esc key to move the cursor to the
Action list.
To Next Page
Loading...
Need help?
General
