SGE2010/SGE2010P Administration Guide 35
System Configuration
Using the Console
To open the screen:
1. From the Switch Main Menu, select 1. System Configuration.
2. From the Sy
stem Configuration Menu, select 6. IP Configuration.
3. From the IP
Configuration menu, select 4. HTTPS Configuration.
To change HTTPS settings:
1. Select Ed
i
t, and then make your changes.
2. Press the Esc ke
y to move the cursor to the Action list.
3. Select Sav
e to save your changes.
4. When the Oper
ation complete message appears, press the Esc key to move the cursor to the
Action list.
Network Configuration
The Network Configuration screen provides access to screens where you can execute ping tests
and traceroute tests for IPv4 and IPv6 addresses.
1. Ping IPv4 (see page 36)
2. Ping IPv6 (see page 37)
3. TraceRoute IPv4 (see page 38)
4. TraceRoute IPv6 (see page 39)
0.Back (Select to return to the previous menu.)
To open the screen:
1. From the S
w
itch Main Menu, select 1. System Configuration.
2. From the Sy
stem Configuration Menu, select 6. IP Configuration.
3. From the IP
Configuration menu, select 5. Network Configuration.
To Next Page
Loading...
Need help?
General
