Cisco Linksys WPS54G User Manual

Introduction to the Linksys Wireless-G PrintServer and its benefits for sharing printers.

Overview of the manual's structure, chapters, and how to use its features.

Details the physical ports and reset button on the PrintServer's bottom panel.

Explains the status LEDs on the front panel and their meanings.

Provides an overview of the physical setup and connection steps for the PrintServer.

Step-by-step guide to connecting the PrintServer via Ethernet and USB to your network.

Instructions on how to physically place and position the PrintServer for optimal wireless performance.

Instructions on how to launch and begin the automated setup process for the PrintServer.

Details the sequence of screens and actions required during the PrintServer installation wizard.

Introduction to installing the PrintServer software and drivers on Windows operating systems.

Guidance on how to follow the steps for driver installation specific to this chapter.

Step-by-step instructions for installing the necessary driver software for the PrintServer on Windows.

Final steps for configuring the installed PrintServer driver for proper functionality.

Introduction to accessing and using the PrintServer's web-based utility for advanced configuration.

Details the general settings available on the 'Setup' tab of the web utility.

Configuration options for the TCP/IP protocol, including IP address settings.

Configuration parameters for the AppleTalk network protocol.

Settings related to the NetBEUI network protocol and its options.

Configuration for SNMP settings to manage and monitor the PrintServer.

Basic wireless configuration settings like SSID, channel, and network type.

Security settings for the wireless network, including WEP and WPA encryption.

Options for configuring the PrintServer to print e-mails received over the internet.