Cisco MDS 9148T User Manual

A setup utility is automatically launched the first time you boot the switch and guides you through the basic
configuration. For instructions about how to configure the switch and check module connectivity, see the
Cisco Fabric Manager Fundamentals Configuration Guide.
Note
Cisco MDS 9148T 32-Gbps 48-Port Fibre Channel Switch Hardware Installation Guide
49
Connecting the Cisco MDS 9148T Switch
Powering Up the Switch

Cisco MDS 9148T Specifications

General

Ports	48
Port Type	Fibre Channel
Form Factor	1RU
Switching Bandwidth	1536 Gbps
Power Supply	Dual, hot-swappable
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Management	CLI
Dimensions	1.72 x 17.3 in
Humidity	5% to 95% non-condensing