Cisco MDS 9148T User Manual

DateTimeVerified ByPlanning ActivityTask No.
Electromagnetic interference
(EMI) evaluation:
• Distance limitations for
signaling
• Site wiring
• RFI
3
levels
6
1. Verify that the power supply installed in the chassis has a dedicated AC source circuit.
2. UPS = uninterruptible power supply.
3. RFI = radio frequency interference.
Contact and Site Information
Use the following worksheet to record contact and site information:
Table 12: Contact and Site Information
Contact person
Contact phone
Contact E-Mail
Building/site name
Data center location
Floor location
Address (line 1)
Address (line 2)
City
State
Zip code
Country
Chassis and Network Information
Use the following worksheet to record chassis and network information:
Cisco MDS 9148T 32-Gbps 48-Port Fibre Channel Switch Hardware Installation Guide
63
Site Planning and Maintenance Records
Contact and Site Information

Cisco MDS 9148T Specifications

General

Ports	48
Port Type	Fibre Channel
Form Factor	1RU
Switching Bandwidth	1536 Gbps
Power Supply	Dual, hot-swappable
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Management	CLI
Dimensions	1.72 x 17.3 in
Humidity	5% to 95% non-condensing