Cisco Meraki MR20 User Manual

MR20 Installation Guide
The Cisco Meraki MR20 is a dual-band enterprise class 802.11ac cloud-managed access point.
Package Contents
The MR20 package contains the following:
• MR20 Cloud-Managed Access Point
• Mount plate
• Mount Kit
◦ Wall screws, wall screw anchors, and security screws
1

Cisco Meraki MR20 Specifications

General

Wireless Standards	802.11a/b/g/n
Frequency Bands	2.4 GHz, 5 GHz
MIMO Technology	2x2 MIMO
PoE	802.3af PoE
Ethernet Ports	1 x 10/100/1000 Ethernet port
Mounting Options	Wall, Ceiling
Security Features	WPA2, 802.1X
Antennas	Internal
Operating Temperature	0°C to 40°C (32°F to 104°F)

Summary

MR20 Installation Guide

Pre-Install Preparation

Configure Your Network in Dashboard

Outlines steps for adding the MR20 to your Meraki network via the dashboard.

Check and Upgrade Firmware

Recommends upgrading the MR20's firmware before or immediately after installation.

Check and Configure Firewall Settings

Advises on ensuring firewall allows necessary outgoing connections for the AP.

Assigning IP Addresses to MR20s

Dynamic Assignment

Static Assignment

Installation Instructions

Choose Your Mounting Location

Provides guidance on selecting an optimal mounting location for the MR20.

Mount the MR20

Attach the MR20 to the Mount Cradle

Details how to physically attach the MR20 to its mounting cradle.

Secure and Verify MR20

Secure the MR20

Power the MR20

Explains how to connect power to the MR20, considering mounting location.

Check LEDs

Verify Access Point Connectivity

Check Network Coverage

Troubleshooting