Cisco Meraki MR76 User Manual

MR76 Installation Guide
The Cisco Meraki MR76 are dual-band enterprise class 802.11ax cloud-managed access points. Designed for highest capacity and highest density, the
MR76 meets the needs of the most demanding environments. The access point also includes a third radio dedicated to optimizing the RF environment
and securing the airwaves.
About this Guide
This guide provides instruction on how to install and configure your MR76 access points. This guide also provides mounting instructions and limited
troubleshooting procedures. For more wireless installation guides, refer to the wireless installation guides section on our documentation website.
Product Overview
Physical Specifications
MR76
Interfaces
• 1x 10/100/1000 BASE-T Ethernet (RJ45)
• Four external N-type female antenna connectors
Power
• Power over Ethernet: 37 - 57 V (802.3af compatible)
• Power consumption: 15W max (802.3af)
• Power over Ethernet injector sold separately
Environment
• Operating temperature: -40 °F to 131 °F (-40 °C to 55 °C)
• Humidity: 5 to 95% non-condensing
• IP67 Environmental rating
Physical Security
Note: Actual power consumption may vary depending on the AP usage.
1

Cisco Meraki MR76 Specifications

General

Model	MR76
Wireless Standard	Wi-Fi 6 (802.11ax)
MIMO	4x4
MU-MIMO	Yes
Mounting	Wall, Ceiling
Operating Temperature	0°C to 40°C (32°F to 104°F)
Frequency Bands	2.4 GHz, 5 GHz
PoE Support	802.3at

Summary

Product Overview

Physical Specifications

Details the physical attributes and interfaces of the MR76 access point, including Ethernet ports and antenna connectors.

Package Contents

Understanding the MR76 Mount Plate

Safety and Warnings

Provides essential safety precautions and warnings for installation, electrical handling, and proper usage.

Pre-Installation Preparation

Configure Network in Dashboard

Guides users through adding the MR76 to a Meraki network, creating a new network, and mapping AP locations.

Check and Upgrade Firmware

Recommends upgrading the MR76 firmware post-installation for optimal performance and provides LED indicators for status.

Assigning IP Addresses

Static IP Address Assignment

Provides a step-by-step guide for setting static IP addresses using the AP's built-in web server.

Tools for Installation

Installation Instructions Overview

Choosing the Mounting Location

Offers guidance on selecting an optimal mounting location for the MR76, considering line of sight and antenna obstruction.

Wall/Ceiling Mount Installation

Describes how to install the mount plate on a wall or solid ceiling using included wall anchors and screws.

Pole Mount Installation

Details how to mount the MR76 to a pole using included mounting straps, specifying strap compatibility for pole diameter.

Antenna Selection and Usage

Antenna Selection Guide

Guides antenna selection for MR76, detailing omni-directional, sector, patch, and stadium patch antenna types and applications.

Power the MR76

Verify Functionality and Coverage

Check LED Indicators

Instructs to check the MR76's LED status for normal operation, firmware upgrades, or connectivity issues.

Verify AP Connectivity

Explains how to connect a client device to the MR76 and test network connectivity through a web browser.

U.S. Regulatory Wireless Notice

FCC Compliance Statement

States the device complies with Part 15 of FCC rules, subject to conditions preventing harmful interference.

Canadian Regulatory Wireless Notice

Industry Canada Statement

States compliance with RSS-210 of Industry Canada rules and the conditions for operation.