Need help?Do you have a question about the Cisco Meraki MR52 and is the answer not in the manual?
General| 2.4 GHz | Yes |
|---|---|
| Modulation | 256-QAM |
| Frequency band | 2.412 - 5.825 GHz |
| Networking standards | IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11e, IEEE 802.11g, IEEE 802.11h, IEEE 802.11i, IEEE 802.11k, IEEE 802.11n, IEEE 802.11r, IEEE 802.11u |
| Virtual LAN features | Tagged VLAN |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Maximum data transfer rate | 2500 Mbit/s |
| WAN connection | Ethernet (RJ-45) |
| USB 2.0 ports quantity | 0 |
| Ethernet LAN (RJ-45) ports | 2 |
| Security algorithms | AES, IPSEC, TKIP |
| Antenna features | Integrated antenna |
| Antenna direction type | Omni-directional |
| AC input voltage | 12 V |
| Power consumption (max) | 21 W |
| Placement | Ceiling, Table, Wall |
| Product color | White |
| Cable lock slot type | Kensington |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
Weight and Dimensions| Depth | 162 mm |
|---|---|
| Width | 268.2 mm |
| Height | 38.8 mm |
| Weight | 820 g |
Guides on logging into Meraki Dashboard and adding the MR52 to your network.
Recommends upgrading MR52 firmware before installation for optimal performance.
Details required outgoing firewall ports and IP addresses for the MR52.
Explains dynamic or static IP assignment methods for MR52s on the LAN.
Provides guidance on selecting an optimal mounting location for best MR52 performance.
To Next Page
