Cisco Meraki MR46E - User Manual

MR46E Installation Guide
The Cisco Meraki MR46E are dual-band enterprise class 802.11ax cloud-managed access points. Designed for highest
capacity and highest density, the MR46E meets the needs of the most demanding environments. The access point also
includes a third radio dedicated to optimizing the RF environment and securing the airwaves.
About this Guide
This guide provides instruction on how to install and configure your MR46E access points. This guide also provides
mounting instructions and limited troubleshooting procedures. For more wireless installation guides, refer to the wireless
installation guides section on our documentation website.
Product Overview
Physical Specifications
MR46E
Interfaces
• 1x 100/1000/2.5G BASE-T Ethernet (RJ45)
• 1x DC power connector (5.5 mm x 2.5 mm, center positive)
Power
• Power over Ethernet: 42.5 - 57 V (802.3at compliant)
•
Alternative: 12 V DC input
•
Power consumption: 18W max (802.3at)
•
Power over Ethernet injector and DC adapter sold separately
Environment
1

Cisco Meraki MR46E Specifications

General

Model	MR46E
Maximum Data Rate	4.8 Gbps
Ethernet Ports	1 x 100/1000/2.5G BASE-T Ethernet
MU-MIMO	Yes
External Antenna Support	No
Humidity	5% to 95% non-condensing
Wireless Standard	802.11ax
Frequency Bands	2.4 GHz and 5 GHz
Power over Ethernet	802.3at
Mounting Options	Ceiling, Wall
Operating Temperature	32 to 104 °F
Management	Cloud-managed
PoE Support	802.3at
Bluetooth	Yes
Mounting	Ceiling, Wall
MIMO	4x4
Radio Chains	4

Summary

About this Guide

Product Overview

Physical Specifications

Details the physical characteristics and components of the MR46E access point, including interfaces and power.

Security Features

External Antenna Ports

Ethernet Ports

Power Source Options

Factory Reset Button

LED Indicators and Run Dark Mode

Package Contents

Safety and Warnings

Pre-install Preparation

Configure your Dashboard Network

Assigning an IP Address

Dynamic Assignment

Describes how DHCP can assign static IP addresses to Meraki APs for network features.

Static Assignment

Details the process of configuring static IP addresses directly on the AP via its web server.

Collect Tools

Collect Additional Hardware for Installation

Installation Instructions

Choose Your Mounting Location

Guidance on selecting an optimal location for the access point, considering coverage and cable length.

Wall or Solid Ceiling Mount Using Mount Cradle

Drop Ceiling Mount using Mount Cradle

Electrical Junction Box Mount Using Mount Cradle

Getting Power to the AP

Desk or Shelf Mount

Physical Security

Verify Device Functionality and Test Network Coverage

Check LEDs

Instructions for checking the status and meaning of the access point's multi-color LED indicators.

Basic Troubleshooting

Check Radio Functionality by Making the AP a Repeater

Check Ethernet Port Functionality by Connecting to the AP

Check Static IP Address Configuration

Warranty

Support and Additional Information