Cisco Meraki MR33 - User Manual

MR33 Installation Guide
The Cisco Meraki MR33 is a dual-band enterprise class 802.11ac cloud-managed access point. Designed for high
capacity and high density, the MR33 meets the needs of the most demanding environments, and also includes the first
ever cloud-managed third radio dedicated to optimizing the RF environment and securing the airwaves.
Package Contents
The MR33 package contains the following:
• MR33 Cloud-Managed Access Point
• Mount cradle including built-in level tool
• Mount Kit
◦ Drop ceiling mount kit
◦ Wall screws, wall screw anchors, and security screw
◦ Spare hardware
1

Cisco Meraki MR33 Specifications

General

Frequency Bands	2.4 GHz and 5 GHz
Maximum Data Rate	1.3 Gbps
Ethernet Ports	1x 10/100/1000 BASE-T Ethernet (RJ45)
Operating Temperature	0°C to 40°C (32°F to 104°F)
Wireless Standards	802.11a/b/g/n/ac
Power over Ethernet (PoE)	802.3af
Antenna	Integrated omni-directional
Mounting Options	Wall, ceiling
Management	Meraki cloud management
MIMO	2x2:2

Summary

MR33 Features

Security Features

Details on physical security options including security screw and Kensington lock for the MR33 access point.

Ethernet Ports

Power Source Options

Factory Reset Button

Explains the function of the factory reset button for rebooting and restoring the MR33 to default settings.

Pre-Install Preparation

Configure Your Network in Dashboard

Overview of steps to add MR33 to a Meraki network: account creation, network setup, AP addition, and placement.

Check and Upgrade Firmware

Recommendation to upgrade firmware before mounting by connecting MR33 to power and internet.

Assigning IP Addresses to MR33 s

Mounting the MR33

Attach the Mount Cradle

Instructions on attaching the MR33 mount cradle to various surfaces like walls, ceilings, or junction boxes.

Attach MR33 to Mount Cradle

Post-Installation

Secure the MR33

Verify Device Functionality

Steps to verify MR33 functionality: check LEDs, verify connectivity, and test network coverage.

Troubleshooting