Cisco Meraki MR46 User Manual

• Blue - AP in Gateway mode with clients
• Blinking Orange - AP can't find uplink
NOTE: Blinking Green LED indicates that the device is in site survey mode. Please see the Conducting Site Surveys
with MR Access Points for more details.
The MR46 access point may be operated in “Run Dark” mode for additional security and to reduce the visibility of the
access point. In this mode, the LED will not be illuminated. This mode may be enabled through Meraki Dashboard.
Package Contents
The access point packages contain the following:
MR46 Cloud-Managed Access Point
Mount cradle including built-in level tool
Drop ceiling mount kit
5

Cisco Meraki MR46 Specifications

General

Antenna Type	Internal
Operating Frequency	2.4 GHz, 5 GHz
Mounting	Wall, Ceiling
Operating Temperature	0°C to 40°C (32°F to 104°F)
Wi-Fi Standards	Wi-Fi 6 (802.11ax)
Ethernet Ports	1 x 2.5 Gbps (PoE++)
Power over Ethernet (PoE)	802.3at
MIMO	4x4:4
Radio Chains	4