Cisco Meraki MR46 User Manual

Collect Additional Hardware for Installation
You will need the following hardware to perform an installation:
Installation Instructions
Choose Your Mounting Location
A good mounting location is important to getting the best performance out of your access point. Keep the following in
mind:
1. The device should have unobstructed line of sight to most coverage areas. For example, if installing in an office
filled with workspaces divided by mid-height cubicle walls, installing on the ceiling or high on a wall would be ideal.
2. Power over Ethernet supports a maximum cable length of 300 ft (100 m).
9

Cisco Meraki MR46 Specifications

General

Antenna Type	Internal
Operating Frequency	2.4 GHz, 5 GHz
Mounting	Wall, Ceiling
Operating Temperature	0°C to 40°C (32°F to 104°F)
Wi-Fi Standards	Wi-Fi 6 (802.11ax)
Ethernet Ports	1 x 2.5 Gbps (PoE++)
Power over Ethernet (PoE)	802.3at
MIMO	4x4:4
Radio Chains	4