Cisco NCS 5500 Series

Figure 40: Grounding Lug— Cisco NCS 5508 or Cisco NCS 5516
Step 2 (Only NCS 5508 and NCS 5516) Insert the two screws through the holes in the grounding lug. Ensure that the grounding
lug does not interfere with other router hardware, such as power supplies or the network processing engine.
(Only NCS 5504) Insert one screw through the hole in the grounding lug. Ensure that the grounding lug does not interfere
with other router hardware, such as power supplies or the network processing engine.
Hardware Installation Guide for Cisco NCS 5500 Series Modular Routers
72
Install the Chassis
Locate and Ground the Chassis