Send documentation comments to nexus6kdocs@cisco.com.
1-13
Cisco Nexus 6000 Series Hardware Installation Guide
OL-15902-01
Chapter 1 Overview
Cisco Nexus 6004 Switch
Figure 1-10 Airflow
Transceivers
The Cisco Nexus 6004 series switch supports a wide variety of 10 and 40 Gigabit Ethernet connectivity
options using Cisco 40GBASE QSFP and breakout cable options.
This section includes the following topics:
• Transceiver Support Matrix, page 1-13
Transceiver Support Matrix
The Cisco Nexus 6004 switch also supports the following QSFP transceivers:
Cisco SFP Description
QSFP-40G-SR4 40GBASE-SR4 QSFP module, (multimode fiber [MMF] at 100m)
QSFP-40G-CSR4 40GBASE Extended CSR4 QSFP module, (MMF at 300m)
QSFP-4x10G-AC7M Cisco 40GBASE-CR4 QSFP+ to 4 10GBASE-CU SFP+ direct-attach
breakout cable, 7m, active
QSFP-4x10G-AC10M Cisco 40GBASE-CR4 QSFP+ to 4 10GBASE-CU SFP+ direct-attach
breakout cable, 10m, active
QSFP-H40G-CU1M Cisco 40GBASE-CR4 QSFP+ direct-attach copper cable, 1m, passive
QSFP-H40G-CU3M Cisco 40GBASE-CR4 QSFP+ direct-attach copper cable, 3m, passive
QSFP-H40G-CU5M Cisco 40GBASE-CR4 QSFP+ direct-attach copper cable, 5m, passive
QSFP-H40G-ACU7M Cisco 40GBASE-CR4 QSFP+ direct-attach copper cable, 7m, active
QSFP-H40G-ACU10M Cisco 40GBASE-CR4 QSFP+ direct-attach copper cable, 10m, active
To Next Page
Loading...
